Yamaha EAU10080 Motorcycle User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
EAU12941
Brake pedal
The brake pedal is on the right side of
the motorcycle. To apply the rear
brake, press down on the brake pedal.
EAU13060
Fuel tank cap
To remove the fuel tank cap
1. Push the levers on the left and
right side of the rider seat backrest
as shown and slide the rider seat
backrest forward.
2. Insert the key into the lock, and
then turn it 1/4 turn clockwise. The
lock will be released and the fuel
tank cap can be removed.
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key inserted
in the lock and with the mark on the
cap facing forward.
2. Turn the key counterclockwise to
the original position, and then re-
move it.
3. Slide the rider seat backrest rear-
ward and push it down.
NOTE:
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.
WARNING
EWA10130
Make sure that the fuel tank cap is
properly installed before riding.
1. Brake pedal
1. Opening lever
1. Unlock.
U5GK15E0.book Page 6 Tuesday, April 13, 2004 3:52 PM