Yamaha 43D-F8199-10 Offroad Vehicle User Manual


 
5-5
Measuring the tire pressure
Use the low-pressure tire gauge.
TIP
The low-pressure tire gauge is included as stan-
dard equipment. Make two measurements of the
tire pressure and use the second reading. Dust or
Rear:
Manufacturer/model:
MAXXIS/M940
Size:
AT18 x 9-8
Type:
Tubeless
The tires should be set to the recommend-
ed pressure:
Recommended tire pressure:
Front:
25 kPa (3.6 psi) (0.25 kgf/cm
2
)
Rear:
25 kPa (3.6 psi) (0.25 kgf/cm
2
)
Check and adjust tire pressures when
the tires are cold.
Tire pressures must be equal on both
sides.
Tire pressure below the minimum speci-
fied could cause the tire to dislodge from
the rim under severe riding conditions.
Minimum tire pressure:
Front:
22 kPa (3.2 psi) (0.22 kgf/cm
2
)
Rear:
22 kPa (3.2 psi) (0.22 kgf/cm
2
)
Use no more than the following pressures
when seating the tire beads.
Maximum tire seating pressure:
Front:
250 kPa (36 psi) (2.5 kgf/cm
2
)
Rear:
250 kPa (36 psi) (2.5 kgf/cm
2
)
Higher pressures and fast inflation may
cause a tire to burst. Inflate the tires very
slowly and carefully.
5