Filter
Top Products
Filter Mode (N/A on XTR-500/550/555)
There are times when a radar detector in another
v
ehicle, can unintentionally emit a frequency
w
hich can cause your detector to falsely alarm.
The Whistler Filter Mode options provide
a
dditional signal processing to minimize the
occurrences of these false alarms. Filter mode
p
rovides norm
al processing. Filter 1 mode
p
rovides additional signal analysis before
alarming.
F
ilter Mode is the factory default setting and
should provide adequate filtering for most
conditions. If you experience excessive alerts
due to radar detectors in other vehicles, try Filter
1 mode. Filter Mode analysis occurs in Highway
Mode and all City Modes. See Option Selection
Mode to change the filter settings.
Intellicord
®
Ready
(N/A on XTR-500/550/555)
Using Whistler’s optional Intellicord
®
Power Cable
allows some models to control the detector’s
features such as Power On/Off, City Modes,
Dim/Dark, and Quiet/Auto Quiet with a simple
press of the button on the Power Cable. Two
features can be controlled: one by a short press of
the button, and the second by a long press of the
button. Option Mode allows the user to program
the feature assignments.
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Abbreviated Power Up
Sequence, and VG-2 Mode. Press the Menu button to enter
Option Select Mode. When selecting options, the Dark or
Quiet buttons must be pressed within 20 seconds or Option
Select Mode will automatically be exited.
OPERATION
Option Select for Model XTR-575/580/590
Press and hold Power button to exit Option Select Mode.
Vehicle Battery Monitor (XTR-590 only)
The vehicle’s batter
y voltage can be displayed
by pressing and holding the Dark and Quiet
buttons simultaneously.
OPERATION
12
14
Option Select Mode (
Continued)
To enter:
Option Select for Model XTR-475
Note
: Option Select Mode band and filter on/off on the
XTR-475 is shown with the first bar “I” on the alert display.
Press and hold Power button to exit Option Select Mode.
Option Select for Model XTR-500/550/555
Press and hold Menu button to exit Option Select Mode.
OPERATION
13