Filter
Top Products
Your Whistler unit is expertly engineered and designed to exacting quality standards to
provide you with reliable, trouble-free operation. If your unit has been correctly installed
following the guidelines in this manual, but is not operating optimally, please refer to the
troubleshooting guide below.
Problem: Unit will not turn on.
•Check the proper installation of the batteries.
•Press and hold the Power/Menu/ESC button for 3 seconds
Problem: Clock doesn’t work or displays the wrong time.
•Position yourself in a clear area so the unit can obtain a satellite signal. Once a satellite
lock is established the clock will display the time. Unit will not automatically adjust the time.
Go into the setting menu and select your time zone to have the unit properly display the
correct time. See page 17.
Problem: Why are the distances shown incorrect for each hole?
•Check the Units setting in the set up menu to be sure the distance units (yard or meter)
are correct.
Specifications Troubleshooting
30 31
GPS Receiver 20 Parallel Channels- SiRF III
Acquisition Time Reacquisition: < 0.1 sec (Average)
Hot Start: 1 sec
Warm Start: 36 sec
Cold Start: 42 sec
Weight 1.68 oz
Size 2.83”x 1.96” x .80”
Display 96x65 FSTN LCD with backlight
Battery Life 20 hours (good sat lock, no backlight)
Operating Temperature 14 to 113 F (-10 C to +45C)
Storage Temperature -4 to 113 F (-20 C to +45C)