Whistler 3300 Radar Detector User Manual


 
OPERATION
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
1 = weak signal, 9 = strong signal
An asterisk is displayed when the optional rear antenna
receives a signal. Example:
Pulse Protection
®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display reads:
After 3 seconds standard alert pattern continues.
14
Ka
Display
Ka Band
Detected
Digits
ramp
1-9
9
Ka*
9
PULSE
RADAR ALERTS
15
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
Press City and Quiet simultaneously and release. Display
reads:
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
Press P/V to exit.
Voice Module Port
Allows you to use a Whister Voice Module, P/N 202971 (See
accessory page for ordering, option mode for program-
ming). Any other device may damage the unit and void
your warranty. When mute or auto quiet modes are
engaged, the audio will be cancelled to the voice port.
Rear Antenna Port
Allows you to use only a Whister SWRA-3300 rear antenna,
P/N 202964. Any other device may damage the unit and
void your warranty.
• Remove power from console.
• Plug rear antenna into Radar 2 Port.
• Reapply power to console, after self-test display shows:
• Press Dark to accept or City to cancel.
TEACH
R2 ON?
3300 10/4/00 9:43 AM Page 17