Filter
Top Products
RESET FEATURES
23
LASER/VG-2 ALERTS
Laser Audio/Visual Alerts
When a laser signal is detected the word “Laser” and sig-
nal strength is displayed, the audio alert is continuous for
a minimum of 3 seconds. Example:
The more “|||” the closer the laser source.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
it will detect VG-2.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
Text message confirms detection of VG-2.
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still detected, the unit continues to hide
and repeats the VG-2 alert. If no signal is detected, two
beeps are provided, indicating an “all clear” condition.
During VG-2 Alert X, K, and Ka band signals cannot be
received. (Reference page 27 for VG-2 information.)
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
Reset Features
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Press and hold (Power) and (Quiet).
• Plug Power Cord into unit.
• Wait for 2 beeps.
• Release and . Unit is now reset.
1. Audio to level (4).
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Voice ON.
7. Combo ON.
8. Safety ON.
9. Vehicle Battery Saver ON.
10. Full Power Up sequence.
11. Default TONE 3.
12. Unit ON or OFF.
13. All Band ON.
NOTE: Must recalibrate compass after resetting detector.
22