Filter
Top Products
OPERATION
13
OPERATION
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the display.
• P ress and hold Power for 2 seconds to reduce illumination
to a Dim setting.
• P ressing and holding the power button for 2 seconds a
second time engages Dark Mode.
Dim or dark can be engaged during an alert. In Dark Mode,
the display goes dark for as long as a signal is being detect-
ed and for 20 seconds after, then the display re t u rns to the
dimmer setting.
• P ressing and holding the power button a third time
re s t o res full illumination to the display.
Engaging/Disengaging VG-2
See option select mode to turn this feature on.
12
City/City 1/City 2 Mode
W h i s t l e r ’s Three Stage City Mode is designed to reduce the
annoyance of automatic door openers, intrusion alarms and
other devices which share frequencies with police radar.
• P ress City to engage City. Display re a d s :
• P ressing City a second time engages City 1. Display re a d s :
• P ressing City a third time engages City 2. Display re a d s :
• P ressing City a fourth time cancels City, City 1, and City 2.
Display re a d s :
In City Mode, weak speed/safety radar signals give an initial
a l a rm of two beeps, and then the unit remains quiet unless
the signal becomes very strong. When the signal stre n g t h
i n c r eases, two additional beeps are provided. In City 1
Mode, only the X band sensitivity is lowered. In City 2 Mode,
X-band is not detected. CAUTION: Some towns/small cities
may still be using X band radar.
If Auto Quiet is engaged in City 1 or City 2 modes and the
unit receives a strong radar signal, the unit perf o rms the Auto
Quiet feature. City Modes do not change the audio alert for
laser or VG-2.
1740/1745 manual 3/6/02 2:17 PM Page 15