Filter
Top Products
SAFETY RADAR ALERTS
18
LASER/VG-2 ALERTS
19
In communities where transmitters are located, the Safety
Wa rning System alerts you with 60 voice messages.
When Safety Radar is detected the audio alert is geiger
counter-like.
Example:
Note: Not all areas have Safety Wa rning System
™
transmitters. Visit the
Safety Wa r ning System
™
web page at www. s a f e t y r a d a r.com for SWS
l o c a t i o n s .
Laser Audio/Visual Alerts
When a laser signal is detected V/L and signal strength is
displayed, the audio alert is continuous for a minimum of 3
seconds. Example:
The more “|||” the closer the laser source.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
it will detect the VG-2 Gun.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an “all clear” condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
(Reference page 25 for VG-2 information.)
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
Blinking
1740/1745 manual 3/6/02 2:17 PM Page 21