Whistler 1670 Radar Detector User Manual


 
INSTALLATION
Mounting Guidelines
Mount the unit as low as possible near the center of the
windshield.
Do not mount your unit behind wipers, ornaments, mir-
rored sunscreens, etc. These obstructions have metal sur-
faces which can affect radar and laser signals and reduce crit-
ical warning time. (Regular tinted glass does not affect recep-
tion.)
Some windshields have an Instaclear
or Electriclear™
type coating, which affect radar signals. Consult your dealer
or the owner’s manual supplied with your vehicle to deter-
mine if your windshield has this coating.
Avoid placing unit in direct contact with windshield.
To reduce the possibility of theft, conceal your unit when
not in use.
Windshield Mounting
Install the two suction cups and rubber bumper onto the
bracket by fitting them into their holes.
Press the suction cups onto the windshield at the location
you have chosen. IMPORTANT: Some newer cars have a
plastic safety coating on the inside of the windshield. The
suction cups may leave permanent marks on this type of
surface. To find out if your vehicle has this type of wind-
shield, check the owner’s manual or ask your dealer. We
recommend that you do not leave the suction cup brack-
et on the window in direct sunlight. If the detector is
removed, this may cause blistering of the dash in some
vehicles.
Slide the detector onto the bracket until it locks into place.
If necessary, the unit may be leveled by bending the wind-
6