Filter
Top Products
D
C
SOFT CARGO AREA COVER (OPTION)
RIGID CARGO AREA COVER (OPTION)
Installing
Pull all four locking buttons back as far as pos-
sible. Carefully lift in the cover, place the front
section on the two supports behind (A) on both
sides.
HOLDERS FOR FLOOR HATCH
Attach the hooks near the floor (A).
Press together the spring-loaded rails and
insert them in the attachments (B) on both
sides.
Insert the attachments in (C) in the same way.
Place the hooks in (D).
Remove the attachments at (D) and (C) if neces-
sary on both sides when loading the cargo area.
Remove (D), (C), (B), and (A) and roll up the
cover when it is not in use.
Open floor hatch without/with cargo area cover.
Place one rear lock at (B) and press the lock
button forward. Lock the other buttons in the
same way.
Removing
Pull the lock buttons rearward as far as possible
at (A) first, then at (B). Lift out the cover.
FOLDING DOWN THE REAR SEAT
BACKRESTS