55
©
2005 Directed Electronics—all rights reserved
TTrraannssmmiitttteerr FFuunnccttiioonnss
The receiver uses a computer-based learn routine to learn the
transmitter buttons. This makes it possible to assign any specific
transmitter button, or combination of buttons, to any receiver
function. The transmitter initially comes programmed with the
Standard Configuration, but may also be customized by an autho-
rized dealer. The transmitter buttons indicated in all of the
instructions in this manual correspond to a Standard Configuration
transmitter.
BBuuttttoonn
The arming and panic functions are controlled by pressing on
the transmitter for one second.
BBuuttttoonn
The disarm function is controlled by pressing on the trans-
mitter for one second.
BBuuttttoonn
Silent Mode
™
and an optional auxiliary function are controlled
by pressing . Silent Mode works by pressing for less
than one second. An optional auxiliary function, such as
trunk release, is controlled by pressing and holding for
1.5 seconds.
SSttaannddaarrdd CCoonnffiigguurraattiioonn