Viper Model 160XV Automobile Alarm User Manual


 
1111
©
2005 Directed Electronics—all rights reserved
TToo eenntteerr oorr eexxiitt VVaalleett MMooddee::
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
The status LED will light steadily if you are entering Valet Mode
and will turn off if you are exiting Valet Mode.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press for 1.5 seconds to enter Panic Mode. In Panic Mode, the
horn will honk and the parking lights will flash for 30 seconds. To
stop Panic Mode at any time, press , or on the
transmitter.
NNOOTTEE::
In order for Panic Mode to be effective, the vehicle’s horn (or
optional siren) as well as the vehicle's parking lights must be
connected.
PPaanniicc MMooddee
DRW-35