Filter
Top Products
4
© 1997 Directed Electronics, Inc.
Transmitter Channels
Channel I
The arm/disarm and panic functions, are usually controlled by Button I.
Channel II
The Silent Mode
™
/trunk release function, is usually controlled by Button II.
Silent Mode
™
and Remote Valet
®
work by pressing Button II for less than one
second. Trunk release requires you to press Button II for 1.5 seconds.
Channel III
The remote start function of your system is usually controlled by pressing
Buttons I and II at the same time.These assignments can be changed if need-
ed, such as for two-car operation from one remote.
LED
Channel I
Channel II
Channel III