Viper Model 550HF Automobile Alarm User Manual


 
10
© 1997 Directed Electronics, Inc.
Timer Mode
The system has a built-in timer that will start the vehicle's engine and run it
for the programmed time, every three hours for a total of six operations.
To enter timer mode:
1. Start the vehicle with the key.
2. Press and HOLD Buttons 1 & 2 on the transmitter
(or press and HOLD optional momentary switch.)
3. Turn ignition OFF. (The vehicle will stop running.)
4. Release transmitter (or push-button.)
5. Engine will restart to confirm system is in timer mode.
You may shut the vehicle down by pressing on the brake pedal or let it run for
its programmed time. In either case, the engine will restart every three hours
for six operations.
To exit timer mode: Turn on the ignition with the key when the vehicle is not
running.
NOTE: If the system receives a shutdown input while operating in the timer mode, the engine will
stop and restart in 3 hours!
2
1