Viper G4203V Automobile Electronics User Manual


 
9
© 2008 Directed Electronics. All rights reserved.
Using Your System
Unlocking
Only after the vehicle is remotely started via the transmitter, press and
release the transmitter button for 1 second to unlock the vehicle’s doors.
The remote responds with 2 short beeps and the green LED on the re-
mote flashes once. The vehicle responds by flashing the parking lights
twice and honking the horn twice to confirm unlocking.
Note:
horn honk is an optional feature.
Car Finder
Before the vehicle is remotely started via the transmitter, press and
hold the transmitter button for 3 seconds to activate the car finder
function. The vehicle responds by flashing the parking lights 5 times
slowly. The remote responds with 1 short beep and the orange LED on
the remote flashes once.
Ignition Controlled Door Locks
If power door locks have been connected to your
system, the doors will lock three
seconds after the ignition is turned
on, and unlock when the ignition
is turned off.