Filter
Top Products
13
© 2005 directed electronics, inc.
22--wwaayy LLCCDD rreemmoottee ccoonnttrrooll ffuunnccttiioonnss
The LCD remote control buttons are used to send commands to
the system. The descriptions below reflect the standard configu-
ration for this system. The buttons can be custom configured for
the user’s specific needs by the installer. Also, the user can
configure the LCD remote for certain responses (see
Programming LCD Remote
section).
standard configurations
Button
The arming function is controlled by pressing this button for
one second.
Button
The disarming function is controlled by pressing this button for
one second.
Button
Silent Mode™ and an optional auxiliary function are controlled
by pressing this button. (Silent Mode™ works by pressing this
button for less than one second before arming or disarming. An
optional auxiliary function, such as trunk release, can be
controlled by pressing this button for 1.5 seconds.)
The auxiliary output controls __________________________.
Button
The panic feature is controlled by pressing this button for
approximately two seconds.
➜