Filter
Top Products
14
© 2009 Directed Electronics. All rights reserved.
Configuring your remote
The Responder LE 2- way and 1- way remote controls have menus for program-
ming the remote to the system, and for configuring the remote control user
features. Before you start make sure the keypad is unlocked. (See Button Auto
Lock )
Button Auto Lock
When On, the remote control buttons lock if more than 20 seconds lapses
between button presses. If a button is pressed when locked, a fault tone is
emitted.
To unlock remote buttons:
Press the
button followed by the
A U
X
button. The remote plays a tone to
confirm.
Button Auto Unlocking
After turning the ignition off, the remote unlocks the buttons until the next com-
mand is performed. If you do not want Auto Unlocking, it can be turned off by
an authorized Directed Dealer.
Button press beep On/Off
Turns On/Off the beeps from the remote when a button is pressed.
Car 2 On or Off
Turns On/Off the Car 2 operation from the remote.
Paging* On or Off, Power Save and Power Save 2
The Responder LE remote monitors your system's messages via Paging.
* This option is not available with the 1- way companion remote.
When Paging is On the remote wakes up every few seconds to detect pages
from the system. When Off the remote does not wake up to receive pages
from the system.