Filter
Top Products
9
© 2009 Directed Electronics. All rights reserved.
Advanced commands: function level 2
Valet mode
Command
: Press
A U
X
two-times and then
A U
X
.
Feedback: Remote beeps 1 to 2 times when entering or exiting Valet Mode
and unlock LED turns on.
Notes: To enter or exit Valet mode, even if Locked. When entering Valet
Mode the remote beeps one-time. When exiting Valet Mode
the remote beeps two-times.
Timer mode
Command
: Press
A U
X
two-times and then
A U
X
.
Feedback: Remote start LED turns on, with 1 beep when enabled and 2
beeps for disabled.
Notes
: Enables or disables the remote start timer mode. (see page
25)
Aux 2
Command
: Press
A U
X
two times and then press
A U
X
.
Feedback
: The Aux LED turns on, and Aux activation sounds.
Notes: This is an optional feature. See your authorized Directed dealer
for details.
Lock status
Command: Press
A U
X
two-times and then hold for 1.5 seconds.
Feedback
: Lock or Unlock LED on 2- way remote lights up to display
if the system is in locked or unlocked mode.