Viper 5002 Automobile Alarm User Manual


 
34
© 2006 directed electronics
Exit Shock Sensor Adjustment Mode:
The adjustment mode will be exited if:
No input from transmitter for 15-seconds.
No input from sensitivity testing for 15-seconds.
The ignition is turned On.
The Valet button is pressed.
The siren and LCD remote will emit 1 long beep and the
vehicle’s LED will extinguish when shock adjustment mode is
exited.
Reset Shock Sensor to Default Setting:
The shock sensor can be restored to a default setting of 10 to
facilitate re-adjustment at any time
wwhhiillee iinn
adjustment mode.
1. Simultaneously press the and buttons.
2. The siren and LCD remote will emit 3 quick beeps to indi-
cate the sensor has been reset to level 10 (mid-range).
3. The system returns to shock sensor adjustment mode for
further adjustment, if required.