Viper 5002 Automobile Alarm User Manual


 
31
© 2006 directed electronics
Adjusting the Shock Sensor Setting
1. Increase Sensitivity—Press and release the button to
increase shock sensor sensitivity by one step. The siren and
remote will emit 2 chirps for each step increased in adjust-
ment (and/or 1 vibrate if programmed). When the shock
sensor adjustment reaches maximum sensitivity when the
indicator bar is filled completely to the right
. There are 21 levels of shock sensor
adjustment, during sensor adjustment these levels are
displayed on the indicator bar as listed below.
nnoottee::
When the arm and disarm are programmed to a sin-
gle button, then the AUX button is used to increase the
sensitivity setting of the sensor.
nnoottee::
When adjusting the shock sensor, ensure that the
vehicle’s doors are closed.