Filter
Top Products
6
2. US
E AS A JUMP-ST
ART SYSTEM
WARNING:
1. Before using this system to jump-start any vehicle or boat, read and
understand all instructions, safety tips, warnings, cautions and first aid
information provided in this manual and on the product labeling.
Additional important information may also be provided by the vehicle’s
battery system manufacturer.
2. Be aware of first aid procedures before attempting jump-start procedure.
3. Always wear protective eyewear when working with a lead acid-type battery.
4. Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while
working on a vehicle’s battery system.
5. When using this jump-starter in proximity to the vehicle’s battery and engine,
stand the unit on a flat, stable surface, and be sure to keep all cords and
cables away from any moving parts.
6. Check unit periodically for wear and tear. Replace worn or defective parts
immediately; contact Vector Customer Service Department toll-free:
(866) 584-5504 or through our Internet address: www.vectormfg.com.
7. Do not attempt to jump-start a frozen battery.
8.NEVER submerge this unit in water.
9. Do not wear vinyl clothing when jump-starting a vehicle, friction can cause
dangerous static electricity sparks. Remove all jewelry or metal objects-they
can cause short circuits or react with battery acid to cause severe burns.
Remove or secure any loose clothing, and restrain long hair, before attempt-
ing jump-start procedure.
10. Lead-acid batteries generate hydrogen gas during normal operation. More
gas is generated when the battery is charging. Hydrogen gas is explosive,
poisonous to breathe and highly flammable.
Recommendations for optimum performance of the VECTOR
®
jump-starter:
CAUTION:
1. To avoid possible damage that may shorten the unit’s working life, protect
this unit from direct sunlight, direct heat and moisture.
2. This system is to be used ONLY on vehicles, boats, garden tractors
and gasoline powered generators with 12 Volt DC battery systems.
3. This system is NOT designed to be installed as a replacement for
a vehicle battery.
4. Vehicles that have on-board computerized systems may be damaged if
vehicle battery is jump-started. Before jump-starting this type of vehicle, read
the vehicle owner’s manual to confirm that external-starting assistance is
advised.
5. Excessive engine cranking can damage the vehicle’s starter motor. If the
engine fails to start after the recommended number of attempts, discontinue
jump-start procedure and look for other problems that may need to be cor-
rected.
6. This VECTOR
®
jump-starter is equipped with an internal, automatic safety
switch. This switch only activates when connections to are correctly made pos-
itive (+) to positive (+) and negative (-) to negative (-). An incorrect connection
will sound an audible alarm indicating an incorrect connection. Should this
alarm sound, remove the clamps and reconnect ensuring proper polarity.
Once the connections are properly made, the internal switch turns on and you
are ready to jump-start the vehicle. This automatic internal safety switch is fully
automatic and requires no action by the user.
5
FIGURE 1A (Front View) FIGURE 1B (Rear View)
1. Reverse connection indicator
2. Good connection indicator
3. 12 Volt DC accessory socket
with 20 amp overload protection
4. Battery level display
5. Battery level status pushbutton
6. AC/DC recharge port
7. Area work light ON/OFF switch
8. Area work light
ADDITIONAL FEATURES
•
Includes non-spillable, maintenance-free, heavy-duty, new high energy density
17 Amp hour, sealed battery
•
Sturdy and unique compact design provides up to 35 hours of completely
portable 12 Volt DC power
•
Safe to use, transport, and store. Includes an audible polarity alarm
•
Requires no maintenance (other than recharging) for optimum operation
•
Automatic taper charge for AC recharge
•
Audible alarm for reverse polarity
•
Molded high-impact case is tough and durable
•
Built-in area/work light with Ultra bright high intensity LEDs for roadside repairs
and use in remote locations without utility power
CAUTION: Use only adapters supplied with this unit. Never insert any other
adapters into the charging or power receptacles on this unit.
3
1
2
5
11
12
13
10
14
4
9
8
6
7
15
Nozzles
9. Non-slip rubber handle
10. Heavy-Duty Welding Quality
Jumper Cables
11. Compressor Power Switch
12. Heavy-Duty Copper Clamps
13. 260 PSI compressor air hose
and tire chuck
14. Analog pressure gauge
15. Inflation adapters (nozzles)