Filter
Top Products
CONTROLS AND FUNCTIONS
1. Clip Release — Press the clip release button to remove the
LRD 767/LRD 777 from the windshield mounting clip.
2. Rearand Side Laser Detector Lense — For rear and side
detection of laser signals.
3.
Press the
city
button to help reduce X-band false
alarms while driving in the city. When you turn
on the City Mode, the City indicator turns on.
While driving on highways, turn off the City
Mode for long-range detection.
(LRD 777 will give a voice confirmation.)
4.
Press the
audio
button to activate the Audio Alert
Only operation. All the LEDs dim, and the signal
strength meter is disabled.
(LRD 777 will give a voice confirmation.)
5.
Press the
mute
button to activate the Auto Mute
feature, which produces a full alert level when a
signal is first received, then automatically
reduces to chirps for the rest of the warning.
(LRD 777 will give a voice confirmation.)
6. Speaker— Sounds audio alert. There are seven different audio
alert tones to distinguish each type of signal received. When
you become familiar with all the distinct alert tones, you can
operate the LRD 767/LRD 777 just by listening, devoting
your full attention to the traffic in front of you.
7. DC 12V Power Input — Connect the DC power cord here.
8. On-Off/VolumeControl — Turns the power on and adjusts
the Audio Alert volume.
9. Display Panel —LEDs display laser/radar alerts, signal strength,
operation mode, Safety Warning System (SWS) messages,
and eight (8) cardinal directions.
6
CONTROLS
AND FUNCTIONS OF YOUR LASER/RADAR DETECTOR
NOTE: Foldout the
back cover of this
reference guide to
refer to the “Controls
& Functions” page.
Reference
Guide
Back
Cover