Filter
Top Products
CONNECTING THE POWER
The LRD 767/LRD 777 is designed to operate on most 12 VDC
negative ground vehicle electrical systems. The power cord
provided with the unit has a cigarette lighter socket plug at
one end and a small connector at the other.
1) Insert the small connector into the jack on the side of
the unit.
2) Insert the other end into the cigarette lighter socket of
your vehicle.
When installing the power cord, make sure that:
•
The socket is clean to allow proper contact.
•
The power cord does not block the antenna area on the back
of the unit
.
11
INSTALLATION
Use only a Uniden
supplied power cord
or its replacement.