Uniden LRD 6699SWS Radar Detector User Manual


 
Full Warning
When the LRD 6699SWS detects a radar, laser, or safety warning signal,
it emits a distinct warning tone. The corresponding X-, K-, Ka-Super
Wideband, Laser, or SWS indication display along with the
corresponding red, green or amber Three-Color LED. For radar, as the
signal gets stronger, more signal strength LEDs light.
Note: The alert tones for the radar, laser, and SWS are all different.
The Safety Warning System
The Uniden Safety Warning System™ (SWS) is a new communication
system which will provide you with an early warning message when a
road hazard exists. The LRD 6699SWS is capable of detecting SWS
signal broadcasts on the K-band by either law enforcement or local
departments of transportation.
You will receive several indications when an SWS warning is received.
The three-color LED on the left part of the display turns amber, an alert
sounds, and a message appears on the 8-digit screen.
Since some warning messages exceed the screen’s display length, your
detector is designed to scroll messages with more than 8 characters. Also,
during an alert, certain conditions can cause warning indications to be
different from those you’ll usually get. These special indications are
listed below:
If your detector receives a message but cannot determine its content,
the message “
SAFETY WARNING MESSAGE” is displayed.
Similarly, if an incomplete message is received or if the signal is
interrupted during an alert, the 8-character display begins to flash.
The display stops flashing once the full message is received or the
SWS signal is reacquired.
Important: Your unit only displays safety warning messages when it
receives signals from an active Safety Warning System
transmitter.
14
C:...lrd6699.vp
Fri Jun 12 12:56:05 1998
Color profile: Disabled
Composite Default screen