Filter
Top Products
Memory Retention Feature
The Memory Retention Feature retains the LRD 2200SWS’s operational
settings in memory for at least 2 days without power. When you turn on
the LRD 2200SWS, it will be in the same mode as when you turned it off.
Full Warning
When the LRD 2200SWS detects a radar, laser, or safety warning signal,
it emits a distinct warning tone and the corresponding alert LEDs
(X, K, Ka, L, or SWS) will light and blink. The blink rate of the LEDs
increases and the signal strength meter LEDs light successively as the
signal source comes closer.
Audio Alert Only Operation
Press the AUDIO button for Audio Alert Only operation.
When Audio Alert Only is selected, the visual alert and signal strength
meter are disabled. In this mode, all lighted LEDs will dim. Press the
AUDIO button again for the Full Alert (audio and visual) Mode.
(Do not set the Volume control at minimum when in Audio Alert Only
because there will be no alert.)
Note: The audio alert tones for the 3 radar bands and laser are all
different.
MUTE
AUDIO
CITY
14