Toyota Prius HSD Automobile User Manual


 
Radio
Channel Scan
Press the "SCAN" button by the radio tuner knob. It will begin scanning for radio channels. When
it does finds a station, a few seconds will play, then it will automatically scan for the next. Press
the "SCAN" button again when you want the scanning to stop.
If you press then hold the "SCAN" button, only your preset radio channels will be scanned.
Tuner Adjust
In additions to using the knob on the dashboard, you also have the option of adjusting the tuner for
the radio via the buttons on the steering-wheel. Just press & hold either the up or down button with
your left thumb.
CD
CD Change
Holding the track-change button on the steering-wheel, rather than just quickly pressing it, will
cause the CD to be changed instead.
Audio Buttons
Audio Button
Pressing the "Audio" button next to the Multi-Display will reveal the Radio Preset or CD Control
screen, depending on what is playing at that moment.
Pressing the "Audio" button another time will return you to the screen you were previously
viewing, "Consumption" or "Energy Monitor" or "Navigation".
Mode Button
Pressing the "Mode" button on the Steering-Wheel toggles between the AM, FM1, FM2, and CD
modes of the audio system.
Holding the "Mode" button for a few seconds will toggle the power for the audio system on & off.
Inside Air
Recirculate
Avoid using this mode during the winter, since it causes frost on the inside of the windows.
Recirculating warm inside air will prevent the engine from needing to run as often; however, the
moisture you naturally exhale will build up after awhile. Allowing the fresh cold air from outside
to be drawn in will keep the humidity low. The resulting minor MPG penalty is well worth always
having clear glass.
Prius User-Guide 7 of 45 Last Updated: 2/07/2006