Toyota Prius HSD Automobile User Manual


 
Air-Conditioning
Filter Access
There is a hepa filter for the Air-Conditioning system behind the glove-box:
Open the bottom glove-box, and then remove all the contents (since they will end up falling out all
over the floor otherwise).
To the right of glove-box is an attached small plastic hydraulic arm (to add a resistance feel). Pull
on that arm so it separates itself from the glove-box. Then hold onto the left and right sides of the
glove-box while squeezing inwards. This will allow you to pull the glove-box downward, beyond
the usual stopping point. Having accomplished that, you may let go. Just let it hang there, like this:
The air-flow assembling will then be completely visible and very easy to access. You’ll see the
filter at the top, lying horizontal along the entire width of that white plastic air-duct. Just pull on
both sides to slide it out. Then you can easily inspect it and replace it (when needed).
For detail and more illustrations, refer to
http://john1701a.com/prius/prius-airconditioner-filter.htm
Prius User-Guide 27 of 45 Last Updated: 2/07/2006