Filter
Top Products
9
PRI11-0902ENUK-07-00 RH PRI11-0902ENUK-07-00 RH
Instrument cluster
Warning lights
Warning lights inform the driver of malfunctions in any of the vehicle’s systems.
These lights turn on when the engine switch is turned to the ‘‘ON’’ position (without smart entry & start system)
or the ‘‘ENGINE START STOP’’ switch is turned to the IGNITION ON mode (with smart entry & start system). They
will turn off after the engine is started.
There may be a malfunction if a light does not come on, or if the lights do not turn off. Have the vehicle inspected
by your Toyota dealer.
Shift position
indicators
Power mode
indicator
Eco Driving Mode
indicator
EV-Drive Mode
indicator
“READY” indicator
Main indicators and warning lights only - For details, please refer to your Owner's Manual chapter 5-2.
Indicators and warning lights
The indicators inform the driver of the operating state of the vehicle’s main systems.
Charging system Brake system
warning light/buzzer
Master warning
light
High coolant
temperature
Lights
The headlights can be operated manually
or automatically
The front position, tail, license plate and instrument
panel lights turn on.
The headlights and all lights listed above turn on.
The headlights and all lights listed above turn on and
off automatically.
(When the engine is in the ‘‘ON’’ position)
Turning on the high beam headlights
1. With the headlights on, push the lever away to
turn on the high beams.
Pull the lever back to the centre position to turn
the high beams off.
2. You can flash the high beams with the headlights
on or off by pulling the lever towards you, and
releasing it to turn them off.