Filter
Top Products
TOSHIBA
6F9EOlll
4.2.4 Procedure for Making Connections
Connection to the current input terminal block and to the input/output terminal
block shall be made as follows.
The connections are classed as follows.
-
Current input terminal block:
For CT and ZCT secondary circuits
-
Input/output terminal block: For power supply circuit and input/output
circuit
Connection to the current input terminal block (screw fastening type):
Crimp terminal lugs onto wires and then fasten them to the terminals with screws.
Connection to the input/output terminal block (clamp type):
Since wires are directly inserted to the terminals of the terminal block, no
crimping work is necessary.
(1)
Insert a screwdriver into the opening and push down the spring.
--
Screwdriver:
#
3mm
(0.118
in) maximum
-m.
It can be smoothly pried open by levering the screwdriver.
_I
2
5
;
-
33
-