Filter
Top Products
LF470/LF622
4
Installation
Dimensions
If a mounting plate is needed for the LF470, fix the plate (a)
above to the bottom of the LF470. Depending on which pair of
screw holes used, the mounting angle changes by 90 .
Figure3. LF470 Dimensions
Figure4. LF470 Mounting Board
Figure 5. Separate type converter LF622
Unit : mm (inch)
Note: 1 inch = 25.4mm
Note: 1 inch = 25.4mm
Note: 1 inch = 25.4mm
Weight : Approx. 3.5 Kg (
7 lb)
Unit : mm (inch)
Note:
Cable glands are not provided for
LF622
F
cFMus approved type.
Refer to the part Cable connection port at detector.
LCD display
Attachment
I/O cable ground
Excitation cable ground
Power supply
cable ground
Option cable ground
Signal cable ground
IR Switch
56
(2.20)
37
70
(2.76)
This length becomes 78mm if the pipe
connection port
thread is Rc(PT)1/2
and Rc(PT)3/4
.
Signal cable
φ
7
(
φ
0.28)
Excitation
φ
7
(
φ
0.28)
2-M4
(Mounting screw holes)
102
(4.02)
30 (1.18)
φ49 (φ1.93)
*
*