Toshiba HHGP1 GPS Receiver User Manual


 
14
6 F 2 S 0 7 3 8
Connector junction
Insulation treatment
(Autofusion tape, vinyl tape or
water-proof cap)
Coaxial cable
A
ntenna
Debe clamp
Support pole (φ38 to 64
)
Fix the cable to the support
cable by making a circle
while making sure the cable
is long enough.
Figure 6.3.2 An Example of Installation, Using GPA-014B for Antenna (A)
Parker clamp
A
ntenna
Support pole (φ27 to 90)
A
uxiliary mounting
bracket
Tape
A
ntenna cable
Leave the connector slightly loose so
that no excessive force is applied.
Connector junction.
Insulation prevention measure
(Autofusion tape, vinyl tape or water-proof cap)
Figure 6.3.3 An Example of Installation, Using GPA-014B for Antenna (B)