Toshiba GF632 Automobile Parts User Manual


 
- 15 -
6F8A0883
CAUTION
Ground the GF630/LF600F,
GF630/LF610F and GF632 independently
from power equipment. (100 ohm or less
ground resistance)
Use an appropriate device to carry and install
the GF630/LF600F, GF630/LF610F and GF632 .
DO
Operating this product without
grounding can cause electric
shock or malfunction.
DO
If his product falls to the ground,
injury, or malfunction of or damage to
the product, can be caused.
Install a switch and fuse to isolate the
GF630/LF600F, GF630/LF610F and GF632
from mains power.
Do not modify or disassemble the
GF630/LF600F, GF630/LF610F and GF632
unnecessarily.
DO
Power supply from mains power
can cause electric shock or
circuit break-down.
DON’T
Modifying or disassembling this product
can cause electric shock,
malfunction
or damage to this product.
Do not work on piping and wiring with wet
hands.
DON’T
Wet hands may result in electric
shock
The label shown left is placed near the
terminal board for power supply to the
converter.
Be alert to electric shock
To put the flowmeter temporarily on the floor,
place it carefully with something, such as
stopper, to support it so that
GF630/LF600F, GF630/LF610F and GF632
will not topple over.
DO
flowmeter
Stopper, etc. to prevent
from toppling over it.