TeleType Company 3100 GPS Receiver User Manual


 
Troubleshooting Questions
© 2007 TeleType Co.
109
device).
4.Re-insert the SD card (make sure you hear a
clicking sound that indicates the SD card was
inserted fully).
5.Press reset again. Let the device charge in
the car.
Before removing the device from the car you may
want to check the battery remaining indicator. To
check the battery life press the Menu button on
the hardware that will bring you to the start up
screen. Press <Settings> and tap the <Battery>
tab. This will display a bar that represents your
remaining battery life. If the bar appears to be
continuously refilling, the battery is charging.
11.
How do I transfer maps onto my device?
The
WorldNav 3100 does not require maps to be
transferred. All maps and POI's are already
pre-loaded onto your device.
12.
What are the differences between the routing
preferences?
See section 4.2 of this guide.
13.
How can I route from point A to point B with
multiple stops in between?
You will need to
first look up the addresses of any stopping
points. You can create a route by selecting any
of these addresses listed in the History as
needed.
14.
May I change the warning sounds?
Yes, you
can substitute your own .wav files for any of the