Filter
Top Products
Page 16 Four-Cycle Engine • Vertical Crankshaft • Air-Cooled 181-1216-14
II. Oil Fill Cap Without Dipstick (Oil Fill Plug)
If your engine does NOT have a dipstick go to step 1. If
your engine has a dipstick, see "I. Oil Fill Cap With
Dipstick" instructions on page 14.
1. Carefully disconnect spark plug wire and keep it away
from spark plug. See Figures 37 and 38. See "G. Avoid
Accidental Starts" instructions on page 2. Afterward,
continue reading instructions below.
• Keep the disconnected spark plug wire
securely away from metal parts where arcing
could occur.
• Carefully attach the spark plug wire to the
grounding post, if provided.
2. Be sure gas cap is on and tightened securely.
See Figure 39.
3. Be sure you find the correct oil drain plug location, if
present (see equipment manufacturer’s instructions).
See Figure 40.
4. Clean area around oil drain plug. See Figure 40.
Figure 37. Disconnecting/Connecting Spark Plug
Figure 38. Typical Spark Plug Connection
Figure 39. Gas Cap
Figure 40. Oil Drain Plug