Filter
Top Products
2
Figure 1
Figure 2
A. Pre-Installation Notes
B. Installation
1. Vehicle Preparation
a. Lower the driver’s side window to avoid inadvertently locking the keys in the vehicle during
installation.
b. Note and record station presets on radio for step #2 in section E. Finish the Installation.
c. Disconnect negative battery terminal to prevent accidental shorting of any power circuits.
2. System Preparation
Remove the keyless module and transmitters from the package and inspect for any physical dam-
age.
1. Remove one plastic screw and two metal screws indica-
ted by the arrows in Figure 1. Remove the lower dash
panel by pulling the upper side of the lower dash panel
toward you.
2. Disconnect four harnesses (two white housings, one
brown housing and one black housing) on the lower
dash panel. Then completely remove the lower dash
panel.
NOTE: To detach the black housing, insert a slotted
screwdriver as shown in Figure 2 and lift up
the black housing. The black housing can be
detached easily.