Filter
Top Products
IMPREZA U.S.A. (E)
1
Doors and locks
1-15
– CONTINUED –
LED status
Off: System is disarmed.
Double-Flash: System is in valet mode.
Steady Flash: System is armed.
Fast Flash: System has been triggered.
On: System is in pre-arm state (and will arm when all doors are
closed).
B The valet button (built into the status indicator)
The Valet Button is used to engage Valet Mode (see Valet Mode Sec-
tion). In Valet Mode, the security system will not arm, through the siren
will chirp and keyless entry features will function when the security
system is disarmed.
B The emergency override/programming button
HS1001BC
The Emergency Override/Programming button is used to disarm the
alarm system in case of a lost or broken transmitter. It is also used in
conjunction with the transmitter and vehicle ignition to program addi-
tional transmitters.
The Emergency Override Button is located under the driver’s side
dash beneath the diagnostic connector.