Filter
Top Products
6 ► TJ10 User Manual
GENERAL SAFETY PRECAUTIONS CONTINUED:
• Never use extreme heat to disassemble a hydraulic ram or cylinder. Metal fatigue can lead to unsafe conditions.
• Be aware of possible "pinch points" of the jack, and stay clear to avoid personal injury.
• When lifting with the edge of the lifting toe, place a wedge between the load and the top of the lifting toe to
avoid bending the cylinder column.
• Carry the jack only by the carrying handle. Make sure the jack is in the fully lowered position.
• End users must be trained in the proper use of the jack..
• Remove operating levers when not in use to avoid accidental dislocation of the jack, and reduce the tripping
hazard.
• Make sure all personnel are clear of the load before lifting or lowering.
• DO NOT use extenders unless authorized by a qualied person.
• Never use this tool when working around electried rail unless it is de-energized or you have been properly
trained to work on electried rail. If you are not sure the rail is live or not, you must treat it as being live and
dangerous to life.
SAFETY PRECAUTIONS