18 ► MB156 User Manual
The Flow Control Kit is an option for Skid Steer Models.
The Flow Control Kit regulates the ow from the skid
steer hydraulics to the breaker to prevent over-speeding
of the breaker. Follow the instructions below to install
the kit.
• Install the ow control block between the breaker and
the loader’s hydraulics using the 7/16 in. capscrews,
washers, and nuts provided. (Torque to 41 ft-lbs)
• Connect the hoses.
The parts list for the Flow Control Kit is shown below.
HOSE ROUTINGS
R = Return. Route to the breaker OUT port.
S = Supply. Route to the breaker IN port.
P = Pressure. Route to the tractor’s hydraulic pressure.
T = Tank. Route to the tractor’s hydraulic reservoir.
4
R
S
P
T
3
5
8
2
1
6
7
ITEM
NO.
PART
NO. QTY DESCRIPTION
1 34621 1 FLOW CONTROL BLOCK
2 34839 6 WASHER
3 371516 3 NYLOCK NUT
4 02773 4 ADAPTER
5 58653 1 ORIFICE LOCATED UNDER
FITTING DESIGNATED AS "S"
6 58652 3 CAPSCREW
7 58654 2 HOSE
8 58655 2 HOSE
Figure 13. Flow Control Kit
FLOW CONTROL KIT INSTRUCTIONS