Stanley Black & Decker BR40 Automobile Parts User Manual


  Open as PDF
of 22
 
User
TOOL STICKERS & TAGS
 (Shown smaller then actual size)
DANGERDANGER
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS

USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE

TAG TO BE REMOVED ONLY BY

SEE OTHER SIDE
1. FAILURE TO USE HYDRAULIC HOSE LABELED AND CER-

TOOLS ON OR NEAR ELECTRICAL LINES MAY RESULT IN
DEATH OR SERIOUS INJURY.
BEFORE USING HOSE LABELED AND CERTIFIED AS NON-
CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE
HOSE IS MAINTAINED AS NON-CONDUCTIVE. THE HOSE
SHOULD BE REGULARLY TESTED FOR ELECTRIC CUR-

DEPARTMENT INSTRUCTIONS.
2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJEC-
TION INTO THE BODY OR CAUSE OTHER SEVERE
PERSONAL INJURY.
A. DO NOT

CAUSE A LEAK OR BURST.
B. DO NOT 

PRESSURE MAY CAUSE A LEAK OR BURST.
C. CHECK TOOL HOSE COUPLERS AND CONNECTORS
DAILY FOR LEAKS. DO NOT

IN SEVERE PERSONAL INJURY.
IMPORTANT
D. DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO
NOT ABUSE HOSE. DO NOT USE KINKED, TORN OR
DAMAGED HOSE.
3. MAKE SURE HYDRAULIC HOSES ARE PROPERLY CON-
NECTED TO THE TOOL BEFORE PRESSURING SYSTEM.
-
NECTED TO TOOL “IN” PORT. SYSTEM RETURN HOSE

REVERSING CONNECTIONS MAY CAUSE REVERSE

PERSONAL INJURY.
4. DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED-
CENTER HYDRAULIC SYSTEMS. THIS MAY RESULT IN

THE SAME SYSTEM AND/OR SEVERE PERSONAL INJURY.
5. 

6. -
TECTION.
7. TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE,
ALL TOOL REPAIR MAINTENANCE AND SERVICE MUST
ONLY BE PERFORMED BY AUTHORIZED AND PROPERLY
TRAINED PERSONNEL.
IMPORTANT
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS

USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE

TAG TO BE REMOVED ONLY BY

SEE OTHER SIDE
The safety tag (P/N 15875) at right is
attached to the tool when shipped from
the factory. Read and understand the
safety instructions listed on this tag before

attach it to the tool when not in use.
NOTE:
THE INFORMATION LISTED

MUST BE LEGIBLE AT ALL
TIMES.
REPLACE DECALS IF

DAMAGED. REPLACEMENTS
ARE AVAILABLE FROM
YOUR LOCAL STANLEY
DISTRIBUTOR.
Stanley Hydraulic tools

3810 SE Naef Road
Milwaukie, OR 97267
28374
Name Tag (BR40568YA)
05152
Stanley Decal
12835
Name Tag (BR40550)
71072
CE Tool Plate
58601
Sound Level
Decal
(CE Tool only)
11206
Circuit Type C Decal
(CE Tool only)
28409
Composite Decal
(CE Tool only)
 previous next