Filter
Top Products
TRIM ADJUSTMENT
L
R
L
R
L
R
L
R
R
L
L
R
L
R
L
R
A
B
PROBLEMS? Before you return to retailer, please call our HOTLINE for assistance,
1-800-622-8339
DRIVING ON WALLS OR UPSIDE DOWN
To drive on walls upside down you must put the vehicle in
the WALL mode.
NOTE: Avoid driving overhead when other people are
around. Do not stand underneath when driving overhead.
DRIVING ON THE GROUND
To drive on the ground you must put the vehicle in the
GROUND mode.
The fan will not turn ON, but the headlights will turn on and
the vehicle will drive full function on the ground. (The ground
mode saves the battery charge).
Place the vehicle in the ground mode and drive forward
without touching the right joystick.
If the vehicle turns to the LEFT, press the Right trim button
until it drives straight (A).
If the vehicle turns to the RIGHT, press the Left trim button
until it drives straight (B).
The fabric air skirts can be adjusted outward at a 45° angle
to ensure a proper wall suction.
IMPORTANT: The Zero Gravity Micro™ should only be
driven on a smooth, clean, flat surface. Dirt or debris can
get inside the fan and cause damage.
When finished playing with your Zero Gravity Micro™, remove vehicle from wall.
Turn vehicle OFF. Turn the controller OFF. NOTE: The trim setting will reset when the vehicle and controller are turned off.