Snapper GC9520KWV Automobile Parts User Manual


  Open as PDF
of 6
 
6
DEALER CHECKLIST FOR
SNAPPER GROUNDS CRUISER
The following must be completed prior to sale. Refer to the previous pages in this setup instruction and in the
Operator’s manual for detailed instructions. Review this checklist with purchaser. Check () all items actually
performed. Purchaser and dealer must sign this form and the dealer retain the form for future reference.
SET-UP
_____ GENERAL INSPECTION for loose, missing or damaged components. Repaired as necessary.
_____ WHEEL LUG NUTS checked and torqued to 75 ft-lb.
_____ TIRE PRESSURE, FRONT AND REAR, adjusted to 15 PSI.
_____ SEAT BELTS installed, hardware tightened, and function of buckles verified.
_____ OPERATOR PROTECTIVE STRUCTURE installed and hardware torqued to 50-70 ft-lb.
_____ BATTERY activated, charged and installed properly.
_____ STEERING WHEEL installed, alignment checked and nut torqued to 50-70 ft-lb.
_____ CARGO BED AND PROP ROD installed and hardware tightened according to instructions.
_____ CARGO BED LATCH function verified.
_____ OPERATOR CONTROLS checked for binding and damage.
LUBRICATION AND FUEL
_____ ENGINE OIL added to bring level up to full mark (Refer to Engine Manual).
_____ TRANSMISSION FLUID checked and adjusted to full mark. (MOBILFLUID 424)
_____ AXLE COUPLINGS AND STEERING KING PINS greased. (Refer to Operator’s manual).
_____ FUEL added to tank. (Refer to Engine Manual).
OPERATIONAL TEST
_____ ENGINE started, engine idles without dieing and runs smoothly.
_____ SAFETY INTERLOCKS checked and all function correctly. (Refer to Operator’s manual).
_____ TRANSMISSION shifts into forward and reverse without excessive grinding of gears.
_____ CLUTCH engages and accelerates smoothly and does not drag at idle.
_____ STEERING checked and functions properly.
_____ SERVICE BRAKE AND PARK BRAKE checked and both function properly. (Refer to Operator’s manual).
DEALER’S RECORDS & FINAL CHECK
_____ PERSONALLY HANDED Safety Instructions and Operator’s Manual to purchaser.
_____ INSTRUCTED purchaser to read and follow all instructions and warnings in Operator’s Manual.
_____ DEMONSTRATED proper starting procedure and operation of machine to purchaser.
_____ INSTRUCTED purchaser how to service air cleaner, maintain oil level (4-cycle).
_____ ASSISTED purchaser in completing Product Registration Card.
CONSUMER/OPERATOR PRODUCT REGISTRATION CARD
Purchase Date ________________ Model_____________________ Serial No. ____________________
Retailer’s Name _______________________________ Signature ________________________________
Address _________________________________ City _________________ State ______ Zip _____
MACHINE WILL BE USED COMMERCIALLY? _ YES ____ NO
Purchaser’s Name _____________________________ Signature ________________________________
Address _________________________________ City __________________ State______ Zip ______
IMPORTANT: This form is to be retained by the Dealer for future reference regarding
Warranty, proof of purchase, traceability for product recall or service, etc. Complete the
Product Registration Card and Mail to Customer Service Department at SNAPPER, P.O. BOX
1379, McDonough, Georgia, 30253.
INSTRUCTION No. 7-3574 (REV. 1, 8/25/00)
 previous