Filter
Top Products
Removing the roof
Page 26 Guidelines for Rescue Services, smart, 2006
Rescue
smart roadster/roadster coupé (model 452)
The smart roadster and roadster coupé are
equipped with a soft top or a coupé roof as stan
dard equipment.
Soft top:
The locking and release mechanisms for the soft
top are attached to the windshield frame and are
operated automatically when the switch is
pressed.
The control switch is located in the center console
in front of the gearshift lever.
The soft top can only be opened completely if the
voltage supply is present and the ignition is
switched on.
When the folding top is open, the two side
supports can be removed.
• Press the integrated safety switch (1)
• Fold the release lever (2) down
• Remove the side support
P77.39214600
P77.33207500
Coupé roof
The coupé roof installed on the smart roadster
and smart roadster coupé consists of two roof
panels with side supports, joined at the center of
the vehicle.
• Press the integrated safety switch (3)
• Fold the release lever (4) down
• Unlock the side supports (see above)
• Pull the two side sections of the roof upward to
remove
P77.50211900