Pushing away the instrument panel
Page 18 Guidelines for Rescue Services, smart, 2006
Rescue
• Crush the rocker panel near the Apillars
using the spreader
P63.00204900
• Cut through the rocker panel using rescue
shears
P63.00205000
• Make a depression at the bottom towards the
rear of the rocker panel near the Bpillar and
install the telescopic rescue ram
• Position the other end of the rescue ram on the
Apillar level with the instrument panel. To
prevent the base of the rescue ram from
breaking through, make sure that the
supporting points are strong.
• Extend the rescue ram as far as necessary
• To prevent vehicle parts from springing back,
the rescue ram should be left under pressure
until the casualty or casualties have been
rescued from the vehicle
P63.00205100