Filter
Top Products
2. insert Foot Peda_Arm @ into the sleeve of Hydraulic Ram _ and
secure wth M8 x 12 Hex Bolt (4)_
3, Attach Height Lock Re_ease @ to Height Lock Bar using 2 Spdng
Washers G8 (1)AND 2 Nuts M8 (2),
4, Attach T-Handle _to ConnectiRg Rod _ with Cotter Pin (3),
5. Make sure that ali connections are tightened thoroughly.
TO RAISE THE VEHICLE (see Figs 2_3)
1,P_ace_ck on a hard ievef surface
2. To a/'_id item from slippingdu#ng tP_
_aisingo_ration ONLYlitton pointsd
vehicle ed by vehlcie manufacturer F_t Pedal
in the veh_sWsoperatoCsmanual
under the vehicle s liftpoint.
f@t on tab marked LOCK_AL_YS @ec£ to_ sure #_atthe_dd_e andthe
vehicle are p@sit£_edco_Tect_yBEFORE raisingthe }8_k
5, Use Fc_t Peda_to raisevehicle,Pump Foot Peda}unti_tip o_Height L_;_ Bar
m_s past desired _c_kpositbn ridge The tip of the Height LockBar wit!sink
ilto positionjust behindtheddge.Depress releasepeda_s_ight_ysothat #'_etip
movessaugtya_inst _idge
& Applyt}e-downstraps(seepage7, Secudngthe'_,Lehicle)once _hic_e has been
raisedtothedesired workinghe_ht Thoroughlytighten thetwotie-®wn straps.
7, Stabiiize _oaded on a hard surfacefor maximum balance by adjustin9
_ockingscrews
TO LOWER THE VEHICLE, (see Fig, 2)
1, Raise the iack s_ighflyand pull back on the Height L_sk Re_easeto release
2,Fastenthe HeightL_k Retease@ totheQip @_
3. Pressthe Relea_ Pedal_very gently tolower the Saddle_)and vehicle
6