Filter
Top Products
• 36 •
GROUNDING AND AC POWER CORD CONNECTIONS8.
RISK OF ELECTRIC SHOCK OR FIRE.
This battery charger is for use on either a nominal 120V, 50/60 Hz or a nominal 230V, 8.1
50/60 Hz circuit. (See the warning label on the charger for the correct input voltage.)
The charger must be grounded to reduce the risk of electric shock. The plug must be
plugged into an outlet that is properly installed and grounded in accordance with all local
codes and ordinances. The plug pins must t the receptacle (outlet). Do not use with an
ungrounded system.
8.2 Never alter the AC cord or plug provided – if it does not t the outlet,
have a proper grounded outlet installed by a qualied electrician. An improper
connection can result in a risk of an electric shock or electrocution.
If the AC cord is damaged, it must be replaced by the manufacturer, its service agent or 8.3
other qualied person in order to avoid a risk of personal injury or property damage.
Recommended minimum AWG size for extension cord:8.4
100 feet (30.5 meters) long or less - use a 12 gauge (4mm•
2
) extension cord.
Over 100 feet (30.5 meters) long - use a 10 gauge (6mm•
2
) extension cord.
FEATURES9.
Ammeter1.
Timer2.
Charge Rate Switch3.
Battery clips4.
1
2
3
4