Filter
Top Products
5. Remove the bulb assembly and replace it with
the appropriate bulb.
6. Reverse the steps to reinstall the fog lamp
assembly.
Center High-Mounted Stoplamp
(CHMSL)
1. Remove the center high-mounted stoplamp cover
by pulling down on the cover edges.
2. Turn the bulb socket being replaced
counterclockwise one-quarter of a turn and remove
the bulb.
3. Replace it with the appropriate bulb.
4. Replace the cover.
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
1. Open the hood. See Hood Release on page 5-11
for more information.
2. Pull back the interior trim.
3. Remove the fasteners from the backside of the
taillamp assembly.
5-45