Filter
Top Products
OOOO: Put the lever in this position for rapid
wiping cycles.
Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
gently loosen or thaw them. If the blades do become
damaged, install new blades or blade inserts.
Heavy snow or ice can overload the wiper motor. A
circuit breaker will stop the motor until it cools down.
Clear away snow or ice to prevent an overload.
Windshield Washer
{CAUTION:
In freezing weather, do not use your washer
until the windshield is warmed. Otherwise the
washer fluid can form ice on the windshield,
blocking your vision.
Pull the windshield wiper lever toward you to operate
the windshield wipers. Washer fluid will squirt onto
the windshield and the wipers will run for a few cycles
to clear the windshield. For more wash cycles, pull
the lever toward you and hold it there.
Rear Window Wiper/Washer
There is a band on the wiper lever to operate the rear
wiper/washer.
9: Put the band in this position to turn off the
rear wiper.
Z : Put the band in this position to turn on the rear
wiper. This position will be slow, steady wiping cycles.
=(Wash): Hold the band in this position to spray
washer fluid on the rear window. The rear wiper will also
come on. Release the band when enough fluid has
been sprayed on the window. The rear wiper will stay
on until you turn the band to OFF.
3-10