Sanyo KH2442 Automobile Accessories User Manual


 
22
22
2
K
25
S4359146
3-13.
Removing the Casing to Install the Indoor Unit
How to Remove the Casing
(1) Remove the plastic cover. (Fig. 3-31)
(2) Remove the clamp for the wiring connector.
(Fig. 3-32)
(3) Disconnect the wiring connector. (Fig. 3-33)
(4) Set the flap in the horizontal position. (Fig. 3-34)
(5) Remove the 3 screws. (Fig. 3-34)
(6) Remove the casing. (Fig. 3-34)
When replacing the casing, be careful not to crush
the lead wires between the casing and the frame.
(Fig. 3-34)
KH2442
NOTE
Fig. 3-32
Fig. 3-33
0947_T_I
Frame
Flap
Casing
Screws
Fig. 3-34
Fig. 3-31
Plastic cover
Screw
0945_T_I
Clamp
Screw
2023_T_I
Wiring
connector
2024_T_I