Filter
Top Products
(6)
Test operation of recoil starter to see
if
rope recoils satisfactorily and ratchets project and
retract properly. Mount recoil starter to the engine.
(7)
If
spring escapes from reel when disassembling recoil, hook the outer end of spring onto the
notch of reel and rewind the spring into the housing.
(8)
Lubricate the rotating parts, sliding parts and spring with heat resistant grease
or
mobile
oil when reassembling recoil
and
prior to long term storage.
9-2
ELECTRIC
STARTING
MOTOR
(OPTION)
9-
2
-
1
DISASSEMBLY
(1)
The
6mm
terminal nuts (2pcs.)
Remove the 6mm terminal nuts. (Zpcs.)
I
Fig.
77
(2)
"M"
terminal bush
No,l
(3)
The 5mm through bolts
(Zpcs.)
Remove the
"M"
terminal bush
No,
1.
The rear cover
is
disassembled by removing
the
5mm
through
bolts.
(2pcs.I
Fig.
78
-
52
-