Filter
Top Products
Next Generation GPS Bluetooth GPS GPS-6033 Operating Manual
10F, 64, Kang-Ding Road, Taipei 108, Taiwan
Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 E-Mail: info@rikaline.com.tw Web: www.rikaline.com.tw
4
Rikaline
Rikaline International Corp.
0. Quick Use for First Time Setting
Please read this instruction carefully before use.
0.0 Standard Package
GPS Unit + Lithium-ION Rechargeable Battery + Cigarette Adapter + Travel Charger + Document CD +
Warranty Card + Easy-Place Pad + Quick Use.
0.1 Fully charge the battery for at least 10 hours before using.
A fully charged battery can last for 10-12 hours continuously operation facilitating the low power consumption
design at 80mA. Please put the switch at “OFF” or “AUTO” position if you will not use the device for an
extended period of time.
0.2 Activate the Bluetooth function in your PDA or PC
Before activating the Bluetooth function in your PDA/PC, please Switch ON GPS-6033 Receiver for paring and
check if your device is equipped with Bluetooth function. If not, you may need to acquire an optional CF
(PD-3005) or SD Bluetooth card.
NOTE: The pairing procedure is required for the first time only.
0.3 Automatically create a shortcut in Bluetooth Manager window
After the pairing complete, the system will automatically create a quick connect device, Rikaline in Bluetooth
Manager. In further use, you just need to click this device to connect our Bluetooth Receiver.
0.4 Check the Serial Port in Bluetooth Setting
After pairing with the Receiver complete, please click “Serial Port” to confirm the COM port. If you use PDA/PC
to pair the Receiver, please select “Outbound COM port”.
0.5 Set correct Serial Port in your map software
Activate your map function and select the correct serial port.
0.6 Switch off the Bluetooth function
Switch off the Bluetooth function before you turn off your PDA/PC, and Switch off Receiver will disconnect the
GPS function. If the BT GPS is on “AUTO” position, you do not need to take extra action.
0.7 Turn off your PDA or PC
0.8 Others
0.8.1 LED Indicator
LED Status Flash ON OFF
1 Power (Red) Low Power Recharging / System on Sufficient Power
2 Bluetooth (Blue) Paring Transmitting Mode System Off
3 GPS (Green) Position not fix Position Fix GPS not Powered
0.8.2 Pass Word The pass word for paring is “0000”.
0.8.3 Manufacturing Setting
Datum: WGS84
Sentence: GGA, GLL, GSA, GSV, RMC, VTG
Baud Rate: Auto
0.8.4 GPS features
Next generation sensitivity at -157dBm (-187dBw)
32-channel acquisition parallel
0.8.5 BT Feature
Sensitivity: -85
SPP profile
0.8.6 Overall Feature
Low power consumption: <80mA